Woods-powr-grip FLEXR6HV11AC Manual do Utilizador

KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version MODEL NUMBERS: FLEXR4HV11AC, FLEXR6HV11AC SERIAL NUMBER: ___________ (please see ser

Rev 1.0/9-13 8 FLEXR-HV11AC: #35035 OPERATING ENVIRONMENT The operator must determine whether the lifter is intended to be used in each work environ

Rev 1.0/9-13 9 FLEXR-HV11AC: #35035 OPERATION BEFORE USING THE LIFTER The operator must determine whether the lifter is capable of performing each

Rev 1.0/9-13 10 FLEXR-HV11AC: #35035 TO CHANGE THE CONFIGURATION OF VACUUM PADS The lifter can accommodate various load dimensions, depending on the

Rev 1.0/9-13 11 FLEXR-HV11AC: #35035 Positioning the Lifter on the Load Make certain that the contact surfaces of the load and all vacuum pads are f

Rev 1.0/9-13 12 FLEXR-HV11AC: #35035 Vacuum Level on Optimal Surfaces When the lifter is attached to clean, smooth, nonporous load surfaces, it shou

Rev 1.0/9-13 13 FLEXR-HV11AC: #35035 Monitoring Vacuum Indicators The vacuum lift light and the vacuum gauge must remain completely visible to the o

Rev 1.0/9-13 14 FLEXR-HV11AC: #35035 TO RELEASE THE PADS FROM THE LOAD WARNING: Load must be fully supported before releasing vacuum pads. When the

Rev 1.0/9-13 15 FLEXR-HV11AC: #35035 MAINTENANCE WARNING: Make sure power source is disconnected before servicing lifter. Note: One or more wirin

Rev 1.0/9-13 16 FLEXR-HV11AC: #35035 If any deficiency is detected during the inspection, correct it before using the lifter. If necessary, return

Rev 1.0/9-13 17 FLEXR-HV11AC: #35035 MAINTENANCE SCHEDULE Unless specified elsewhere in this INSTRUCTIONS manual, the lifter does not require mainte

Rev 1.0/9-13 18 FLEXR-HV11AC: #35035 for cleaning. Do not use unauthorized rubber cleaners or conditioners, such as those intended for cleaning tir

Rev 1.0/9-13 19 FLEXR-HV11AC: #35035 AIR FILTER MAINTENANCE − LARGE (for 4.4 oz [130 ml] bowl size filters) Filter Function and Conditions Requiring

Rev 1.0/9-13 20 FLEXR-HV11AC: #35035 VACUUM PUMP MAINTENANCE − 4-SCFM ROTARY VANE14 WARNING: Before proceeding with any maintenance, disconnect pow

Rev 1.0/9-13 21 FLEXR-HV11AC: #35035 VACUUM PUMP MAINTENANCE − GAST DAA-V505-GB/D WARNING: Before proceeding with any maintenance, disconnect power

Rev 1.0/9-13 22 FLEXR-HV11AC: #35035 VACUUM SWITCH ADJUSTMENT Vacuum Switch Function A vacuum switch controls the vacuum lift light for an AC lifter

Rev 1.0/9-13 23 FLEXR-HV11AC: #35035 REPLACEMENT PARTS LIST Stock No. Description Qty. 66201 Pump Diaphragm (for diaphragm pumps) 1 66200 Pump Ser

Rev 1.0/9-13 24 FLEXR-HV11AC: #35035 LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of produ

Rev 1.0/9-13 25 FLEXR-HV11AC: #35035

Rev 1.0/9-13 26 FLEXR-HV11AC: #35035

Rev 1.0/9-13 27 FLEXR-HV11AC: #35035

Rev 1.0/9-13 1 FLEXR-HV11AC: #35035 TABLE OF CONTENTS SPECIFICATIONS ...

Rev 1.0/9-13 2 FLEXR-HV11AC: #35035 MAINTENANCE ...

Rev 1.0/9-13 3 FLEXR-HV11AC: #35035 SPECIFICATIONS Description: Designed for use with a crane or other hoisting equipment, the FLEXR-HV11AC lifters

Rev 1.0/9-13 4 FLEXR-HV11AC: #35035 WARNINGS Powr-Grip is pleased to offer the most reliable vacuum lifters available. Despite the high degree of

Rev 1.0/9-13 5 FLEXR-HV11AC: #35035 OPERATING FEATURES Note: Components featured in the following instructions for assembling, operating or mainta

Rev 1.0/9-13 6 FLEXR-HV11AC: #35035 ASSEMBLY 1) Open the shipping container and remove all materials for restraining or protecting the vacuum lift

Rev 1.0/9-13 7 FLEXR-HV11AC: #35035 INTENDED USE LOAD CHARACTERISTICS WARNING: This lifter is NOT intended for lifting hazardous materials, such a