Woods-powr-grip MT5HV11DC Manual do Utilizador

KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version MODEL NUMBER: MT5HV11DC SERIAL NUMBER: ___________ (please see serial label and rec

Rev 7.0/12-12 8 MT5HV11DC: #35087 OPERATION BEFORE USING THE LIFTER The operator must determine whether the lifter is capable of performing each in

Rev 7.0/12-12 9 MT5HV11DC: #35087 TO APPLY THE PADS TO A LOAD Positioning the Lifter on the Load Make certain that the contact surfaces of the load

Rev 7.0/12-12 10 MT5HV11DC: #35087 Reading the Vacuum Gauge The vacuum gauge indicates the current vacuum level in the lifter’s vacuum system. The

Rev 7.0/12-12 11 MT5HV11DC: #35087 TO LIFT AND MOVE THE LOAD Load Capacity and the Warning Light The lifter's Load Capacity is rated at a vacuu

Rev 7.0/12-12 12 MT5HV11DC: #35087 In Case of Power Failure The vacuum package is equipped with a vacuum reserve tank, designed to maintain vacuum t

Rev 7.0/12-12 13 MT5HV11DC: #35087 TO RELEASE THE PADS FROM THE LOAD WARNING: Load must be fully supported before releasing vacuum pads. When the l

Rev 7.0/12-12 14 MT5HV11DC: #35087 AFTER USING THE LIFTER Turn off the remote vacuum package by pushing the vacuum package valve handle inward to th

Rev 7.0/12-12 15 MT5HV11DC: #35087 MAINTENANCE WARNING: Always make sure battery is disconnected before servicing lifter. INSPECTION SCHEDULE Perf

Rev 7.0/12-12 16 MT5HV11DC: #35087 If any deficiency is detected during the inspection, correct it before using the lifter. If necessary, return th

Rev 7.0/12-12 17 MT5HV11DC: #35087 BATTERY TEST The lifter is equipped with a battery gauge to help the operator evaluate whether the battery has ad

Rev 7.0/12-12 18 MT5HV11DC: #35087 battery is fully charged. Following long-term use, a battery gradually loses capacity. Replace it whenever the

Rev 7.0/12-12 19 MT5HV11DC: #35087 Cleaning Regularly clean the face of each vacuum pad to remove oil, dust and any other contaminates. Acceptable

Rev 7.0/12-12 20 MT5HV11DC: #35087 VACUUM TEST Test the vacuum system for leakage routinely, as directed in the preceding INSPECTION and TESTING SCH

Rev 7.0/12-12 21 MT5HV11DC: #35087 AIR FILTER MAINTENANCE (for 1 oz [30 ml] bowl size filters) Filter Function and Conditions Requiring Service An a

Rev 7.0/12-12 22 MT5HV11DC: #35087 AIR FILTER MAINTENANCE (for 4.4 oz [130 ml] bowl size filters) Filter Function and Conditions Requiring Service A

Rev 7.0/12-12 23 MT5HV11DC: #35087 VACUUM PUMP MAINTENANCE − DYNAFLO DV1032102 WARNING: Before proceeding with any maintenance, disconnect power so

Rev 7.0/12-12 24 MT5HV11DC: #35087 VACUUM PUMP MAINTENANCE − THOMAS 107CDC20 WARNING: Before proceeding with any maintenance, disconnect power sour

Rev 7.0/12-12 25 MT5HV11DC: #35087 VACUUM SWITCH ADJUSTMENT Vacuum Switch Function18 A vacuum switch controls the low vacuum warning light and the v

Rev 7.0/12-12 26 MT5HV11DC: #35087 Adjustment Procedure WARNING: Lifting capacity decreases whenever vacuum switch is adjusted to maintain lower va

Rev 7.0/12-12 27 MT5HV11DC: #35087 REPLACEMENT PARTS LIST Stock No. Description Qty. 93220 Vacuum Pump - Diaphragm Type - 1-SCFM [28 liters/minute]

Rev 7.0/12-12 1 MT5HV11DC: #35087 SPECIFICATIONS Model Number: MT5HV11DC Description: Designed for use with a crane or other hoisting equipment, th

Rev 7.0/12-12 28 MT5HV11DC: #35087 LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of product

Rev 7.0/12-12 2 MT5HV11DC: #35087 WARNINGS Powr-Grip is pleased to offer the most reliable vacuum lifters available. Despite the high degree of se

Rev 7.0/12-12 3 MT5HV11DC: #35087 OPERATING FEATURES Note: Components featured in the following instructions for assembling, operating or maintain

Rev 7.0/12-12 4 MT5HV11DC: #35087 ASSEMBLY 1) Open the shipping container and remove all materials for restraining or protecting the vacuum lifter

Rev 7.0/12-12 5 MT5HV11DC: #35087 equipment design and applicable statutory or regulatory standards must be factored into any specific installation.

Rev 7.0/12-12 6 MT5HV11DC: #35087 INTENDED USE LOAD CHARACTERISTICS WARNING: This lifter is NOT intended for lifting hazardous materials, such as

Rev 7.0/12-12 7 MT5HV11DC: #35087 OPERATING ENVIRONMENT The operator must determine whether the lifter is intended to be used in each work environme